EPCOS B57164K0101J000
Technical Data Sheet (578.75KB) EN See all Technical Docs

Image is for illustrative purposes only. Please refer to product description.

Product Overview

The B57164K0101J000 is a 2-pin NTC Thermistor with tinned copper leads and lacquer-coated thermistor disk. This B57164K series through hole mounting thermistor is marked with resistance and tolerance. A lead (wire) may be bent at a minimum distance of twice the wire's diameter plus 4mm from the component head or housing. When bending ensure the wire is mechanically relieved at the component head or housing. The bending radius should be at least 0.75mm. Twisting (torsion) by 180° of a lead bent by 90° is permissible at 6mm from the bottom of the thermistor body. Soldering can use resin-type flux or non-activated flux. The soldering due to insufficient preheating may cause ceramic cracks. Pressure contacting by means of clamps is particularly suitable for applications involving frequent switching and high turn-on powers. Suitable for temperature measurement and compensation.
  • 5mm Lead spacing
  • Wide resistance range
  • 450mW Maximum power
Do not store thermistors where they are exposed to heat or direct sunlight. Avoid contamination of thermistor surface during storage, handling and processing. Do not touch components with bare hands.
Gloves are recommended.

Product Information

Zero Power Resistance at 25°C:
Product Range:
B57164K Series
Beta Value (K):
Thermistor Mounting:
Through Hole
Thermistor Case Style:
Thermistor Terminals:
Radial Leaded
Operating Temperature Min:
Operating Temperature Max:
Automotive Qualification Standard:
No SVHC (15-Jun-2015)

Find similar products  grouped by common attribute


  • Test & Measurement


Gloves are recommended.

Legislation and Environmental

Country of Origin:

Country in which last significant manufacturing process was carried out

RoHS Compliant:
Tariff No:
Weight (kg):

Similar Products