NXP  TJA1043T,112  CAN Bus, Transceiver, CAN, 1, 1, 4.5 V, 5.5 V, SOIC

NXP TJA1043T,112
Technical Data Sheet (323.03KB) EN See all Technical Docs

Image is for illustrative purposes only. Please refer to product description.

Product Overview

The TJA1043T,112 is a high-speed CAN transceiver IC provides an interface between a controller area network (CAN) protocol controller and the physical two-wire CAN bus. The transceiver is designed for high-speed CAN applications in the automotive industry, providing differential transmit and receive capability to (a microcontroller with) a CAN protocol controller.
  • Fully ISO 11898-2:2003 and ISO 11898-5:2007 Compliant
  • Loop delay symmetry timing enables communication at data rates up to 2Mbps in the CAN FD fast phase
  • Suitable for 12 and 24V Systems
  • Low Electromagnetic Emission (EME) and High Electromagnetic Immunity (EMI)
  • VIO Input Allows for Direct Interfacing with 3 and 5V Microcontrollers
  • SPLIT Voltage Output for Stabilizing Recessive Bus Level
  • Listen-only Mode for Node Diagnosis and Failure Containment
  • AEC-Q100 Qualified
  • Very Low Current Standby and Sleep Modes, with Local and Remote Wake-up
  • Capability to Power Down Entire Node While Supporting Local, Remote and Host Wake-up
  • Wake-up Source Recognition
  • Transceiver Disengages from Bus (Zero Load) when VBAT Absent
  • Functional Behaviour Predictable Under All Supply Conditions
  • High ESD Handling Capability on Bus Pins
  • Bus Pins and VBAT Protected Against Transients in Automotive Environments
  • Transmit Data (TXD) Dominant Time-out Function with Diagnosis
  • TXD-to-RXD Short-circuit Handler with Diagnosis
  • Thermal Protection with Diagnosis
  • Under-voltage Detection and Recovery on Pins VCC, VIO and VBAT
  • Bus line Short-circuit Diagnosis

Product Information

IC Interface Type:
No. of TX Buffers:
No. of RX Buffers:
Supply Voltage Min:
Supply Voltage Max:
Interface Case Style:
No. of Pins:
Operating Temperature Min:
Operating Temperature Max:
Cut Tape
Product Range:
Automotive Qualification Standard:
MSL 1 - Unlimited
No SVHC (17-Dec-2015)

Find similar products  grouped by common attribute


  • Communications & Networking;
  • Automotive

Legislation and Environmental

Moisture Sensitivity Level:
MSL 1 - Unlimited
Country of Origin:

Country in which last significant manufacturing process was carried out

RoHS Compliant:
Tariff No:
Weight (kg):

Similar Products