AD5622AKSZ-2REEL7

AD5622 is a 12bit, buffered voltage-out digital-to analogue converter (DAC) that operate from a single 2.7V to 5.5V supply, consuming <lt/>100µA at 5V. This DAC contains an on-chip precision output amplifier that allows rail-to-rail output swing to be achieved. It derives from the power supply inputs to give the widest dynamic output range. This device incorporates a power-on reset circuit that ensures the DAC output powers upto 0V and remains there until a valid write takes place to the device. This device contain a power-down feature that reduces the current consumption of the devices to <lt/>150nA at 3V and provides software selectable output loads while in power-down mode. The device is put into power-down mode over the serial interface. It is used in applications such as process control, data acquisition systems, portable battery-powered instruments, digital gain and offset adjustment, programmable voltage and current sources, programmable attenuators.

• Guaranteed monotonic by design, 3 power-down functions
• Power-on reset to 0V with brownout detection
• On-chip output buffer amplifier, rail-to-rail operation
• Relative accuracy is ±6LSB maximum at (VDD = 2.7V to 5.5V)
• Differential nonlinearity is ±1LSB maximum at (VDD = 2.7V to 5.5V)
• Gain temperature coefficient is 2ppm of FSR/°C typical at (VDD = 2.7V to 5.5V)
• Slew rate is 0.5V/µs typical at (VDD = 2.7V to 5.5V)
• Output noise spectral density is 120nV/Hz typical at (VDD = 2.7V to 5.5V)
• Gain error ±0.0004% of FSR typical at (VDD = 2.7V to 5.5V)
• Operating temperature is -40°C to +125°C, package style is 6-lead SC70

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party