LT1640ALIS8#PBF

LT1640AL is an 8-pin, negative voltage Hot Swap™ controller. It that allow a board to be safely inserted and removed from a live backplane. Inrush current is limited to a programmable value by controlling the gate voltage of an external N-channel pass transistor. The pass transistor is turned off if the input voltage is less than the programmable undervoltage threshold or greater than the overvoltage threshold. A programmable electronic circuit breaker protects the system against shorts. It is designed for modules with a low enable input. It is widely used in application such as central office switching, -48V distributed power systems, negative power supply control etc.

• Allows safe board insertion and removal from a live -48V backplane
• Programmable inrush current
• Programmable electronic circuit breaker
• Programmable overvoltage protection
• Programmable undervoltage lockout
• Power good control output
• Operating supply range is 10V to 80V
• Supply current is 1.3mA typical at (UV = 3V, OV = VEE, SENSE = VEE)
• Operating temperature is -40°C to 85°C
• Package style is 8-lead NSOIC

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party