74HCT1G125GV,125

74HCT1G125GV,125 is a single buffer/line driver with 3-state output. This device inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. It provides one non-inverting buffer/line driver with 3-state output. The 3-state output is controlled by the output enable input (pin active-low OE). A HIGH level at pin active-low OE causes the output to assume a high-impedance OFF-state. It complies with JEDEC standards (JESD8C (2.7 V to 3.6 V), JESD7A (2.0 V to 6.0 V). It features ESD protection (HBM JESD22-A114F exceeds 2000V, MM JESD22-A115-A exceeds 200V).

• CMOS low power dissipation, high noise immunity
• Latch-up performance exceeds 100mA per JESD 78 Class II Level B
• Symmetrical output impedance, balanced propagation delays
• Wide supply voltage range from 4.5V to 5.5V, TTL input level
• Input leakage current is 1.0μA maximum at (VI = VCC or GND; VCC = 5.5V, -40°C to +85°C)
• Supply current is 10μA maximum at (VI = VCC or GND; IO = 0A; VCC = 5.5V, -40°C to +85°C)
• Input capacitance is 1.5pF typical at (-40°C to +85°C)
• Propagation delay is 11ns typical at (VCC = 4.5V, -40°C to +85°C)
• Operating temperature range from -40°C to +125°C
• 5-lead SC-74A package

Warnings

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.