HMC977LP4E

HMC977 is a compact, gallium arsenide (GaAs), monolithic microwave integrated circuit (MMIC), in phase and quadrature (I/Q) downconverter. This device provides a small signal conversion gain of 14dB with a noise figure of 2.5dB and 21dBc of image rejection. It utilizes a low noise amplifier (LNA) followed by an image reject mixer which is driven by an active 2× multiplier. The image reject mixer eliminates the need for a filter following the LNA and removes thermal noise at the image frequency. I and Q mixer outputs are provided and an external 90° hybrid is required to select the required sideband. It is a much smaller alternative to hybrid style image reject mixer downconverter assemblies and is compatible with surface-mount manufacturing techniques. It is used in applications such as point to point and point to multipoint radios, military radar, electronic warfare (EW), and electronic intelligence (ELINT), satellite communications etc.

• 2× LO to RF isolation is 45dB typical at (20GHz to 26.5GHz)
• Noise figure is 2.5dB typical at (20GHz to 26.5GHz)
• Input IP3 is 1dBm typical at (20GHz to 26.5GHz)
• LO drive range from 2dBm to 6dBm
• Supply voltage range from 3.325V to 3.675V
• Supply current is 170mA typ at (TA = 25°C, IF = 1000MHz)
• Phase balance is 17° typ at (TA = 25°C, IF = 1000MHz)
• Amplitude balance is 0.3dB typ at (TA = 25°C, IF = 1000MHz)
• Operating temperature range from -40°C to +85°C
• Package style is 24-lead lead frame chip scale [LFCSP]

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party