FLUKE 789/E

FLUKE 789/E is a ProcessMeter™, an ultimate troubleshooting tool for electricians and instrumentation professionals. It combines the functionality of a full-featured loop calibrator with the power of a CAT III 1000V, CAT IV 600V safety-rated digital multimeter, and the wireless capabilities of Fluke Connect with an optional IR3000FC module. The 789 has a large, dual display with two levels of backlighting and externally accessible fuse and batteries for easy replacement. And it's built-in, selectable 250-ohm HART® resistor eliminates the need to carry a separate resistor. The 789 also has a built-in 24-Volt loop supply, which reduces the need to carry a separate power supply when doing offline transmitter testing. Users can also add the wireless data logging capabilities of the Fluke Connect™ mobile app to log data wirelessly to their smartphone and review it from a remote location.

• Compact digital multimeter and mA loop calibrator solution
• Full-featured mA loop calibrator with built-in 24V loop power
• Quickly and easily troubleshoot every part of a control loop
• Large, bright dual-measurement display
• Operating temperature range from -20°C to 55°C
• Designed in accordance with IEC 1010-1, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No 1010.1-92
• 1000V RMS maximum voltage
• Size (H x W x L) is 50mm x 100mm x 203mm (1.97in x 3.94in x 8.00in)
• 140hours typical (measurement), 10hours typical (sourcing 20mA) battery life
• Manual step (100%, 25%, coarse, fine) plus auto step and auto ramp

Contents

Fluke 789 ProcessMeter, (1 set) AC175 alligator clips, (1 set) TL71 test lead set, (4) AA 1.5V alkaline batteries (installed), Quick reference guide, 3-year warranty.

Notes

Calibration services are available (Europe only). Please visit our calibration services page for more details.