USB-RS232-PCBA

The USB-RS232-PCB is a USB to RS232 level serial UART converter PCB incorporating FTDI's FT232RQ USB to Serial UART interface IC device which handles all the USB signalling and protocols. The PCB provides a fast, simple way to connect devices with a RS232 level serial interface to USB. Each device contains a small internal electronic circuit board, utilising the FT232R plus a USB type-A connector. The integrated electronics also include an RS232 level shifter plus Tx and Rx LEDs which give a visual indication of UART traffic. The PCB is USB powered and USB 2.0 full speed compatible. Each PCB supports a data transfer rate up to 1 Mbaud and supports the FTDIChip-ID™, with a unique USB serial number programmed into the FT232R. This feature can be used to create a security or password protected file transfer access using the PCB.

• USB-RS232-PCB provides a USB to RS232 Serial UART interface.
• Entire USB protocol handled by the electronics on the PCB.
• EIA/TIA-232 and V.28/V.24 communication interface with low power requirements
• UART interface support for 7 or 8 data bits
• Fully assisted hardware (RTS#/CTS#) or X-On / X-Off software handshaking
• Data transfer rates up to 1 Mbaud
• Internal EEPROM with user writeable area
• Support for FT232R FTDIChip-ID™ feature for improved security
• PCB is USB Powered - no external supply required
• Low USB bandwidth consumption

Applications

Communications & Networking, Wireless, Industrial, Sensing & Instrumentation

Warnings

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.